Nice Free-Max Instructions Et Avertissements Pour L'installation Et L'utilisation page 3

PROGRAMMING OF THE OPTIONAL FUNCTIONS
6 - Intermediate position "H" (partial opening/closing). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7 - "RDC" function (drive torque reduction, on closing manoeuvre). . . . . . . . . . . . . . . . . . . . . 13
8 - "FRT" (fabric tensioning) and "FTC" (automatic release of the fabric) functions . . . . . . . . . 14
• 8.1 - Activation procedure of the "FRT" function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• 8.2 - Activation procedure of the "FTC" function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
• 8.3 - Deactivation procedure of the "FRT" or "FTC" function . . . . . . . . . . . . . . . . . . . . 15
9 - Repositioning of limit switch "1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10 - Clearing limit switch positions "0" and "1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
11 - Deleting transmitters from the memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12 - Deleting memorised data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
13 - Automatic Open/Close function in the event of rain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ADDITIONAL INFORMATION
14 - Radio transmitters compatible with Free-Max . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
• The two memorisation modes of transmitters: "Mode 1" and "Mode 2" . . . . . . . . . . . . 18
PRACTICAL EXAMPLES ON HOW TO USE "MODE 1" AND "MODE 2" . . . . . . . . . . . . . . . . . . . . 19
15 - Memorisation of additional transmitters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
• 15.1 - Memorisation of a NEW Transmitter in MODE 1,
when an old and already memorised transmitter is available. . . . . . . . . . . . . . . . . . . . . . 20
• 15.2 - Memorisation of a NEW transmitter in MODE 1,
when no old transmitter is available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
• 15.3 - Memorisation of a NEW transmitter in MODE 2,
when an old and already memorised transmitter is available. . . . . . . . . . . . . . . . . . . . . . 21
• 15.4 - Memorisation of a NEW transmitter in the same mode as an
old and already memorised transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
16 - Block (or unblock) the Free-Max memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
17 - Programming of "0" and "1" positions during series production. . . . . . . . . . . . . . . . . . . . 22
What to do if... (troubleshooting guide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Disposal of the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Free-Max and associated Max-Motor technical characteristics. . . . . . . . . . . . . . . . . . . . . . . . 25
EC Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
English - 3