Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
PROBLEM
Pulsing/pumping
sound while
extracting espresso
or steaming milk.
Water leaking
Machine is On but
ceases to operate
34
POSSIBLE CAUSES
•
The machine is carrying
out the normal operation
of the 15 bar Italian
pump.
•
Water tank is empty.
•
Water tank is not fully
inserted and locked into
position.
•
Auto purge feature.
Immediately after the
espresso, hot water
and steam functions,
the machine will purge
water into the drip
tray. This ensures the
thermocoil is at the
optimal temperature.
•
Water tank is not fully
inserted and locked into
position.
•
The silicone seal
surrounding the shower
screen needs to be
replaced to ensure the
portafiler is properly
secured into the
group head.
•
The safety thermal-cut
out may have activated
due to the pump
overheating.
WHAT TO DO
No action required as this is
the normal operation of the
machine.
Fill tank.
Push water tank down
completely to lock into place.
Ensure the drip tray is firmly
pushed in place and emptied
whenever the Empty Me!
indicator is displayed.
Push water tank down
completely to lock into place.
Refer to "Using the Allen Key",
page 28.
Turn the machine Off and
allow to cool for about 30-60
minutes.
If problem persists, call Breville
Consumer Support.
Publicité
