Publicité
Les langues disponibles
Les langues disponibles
PAGE HEADER.....
OPERATING
BEFORE FIRST USE
Machine Preparation
Remove and discard all labeling and
packaging materials attached to your
espresso machine. Ensure you have removed
all parts and accessories before discarding
the packaging.
Remove the water tank located at the back
of the machine by lifting the water tank
handle. Remove the plastic bag containing
the water filter and water filter holder. Clean
parts and accessories (water tank, portafilter,
filter baskets, milk jug) using warm water
and a gentle dish washing liquid, then rinse
and dry thoroughly. Wipe the outer housing
and drip tray with a soft damp cloth and
dry thoroughly. Do not immerse the outer
housing, power cord or power plug in water
or any other liquid.
NOTE
Do not use abrasive cleansers, pads or
cloths which can scratch the surface.
Do not clean any of the parts or
accessories in the dishwasher.
1
2
Soak water filter for 5 mins
Rinse water filter & mesh
12
3
4
REPLACEMENT DUE
Place filter into filter holder
Set date 2 months ahead
CONDITIONING THE WATER FILTER
•
Remove the water filter and water filter
holder from the plastic bag.
•
Soak the water filter in a cup of water
for 5 minutes, then rinse under cold
running water.
•
Wash the water filter holder with cold
water, taking specific care to rinse the
stainless steel mesh.
•
Insert the water filter into the two parts
of the water filter holder.
•
Set Date Dial 2 months ahead.
•
To install the assembled water filter
holder into the water tank, align the base
of the water filter holder with the adapter
inside the water tank. Push down to lock
into place.
•
Slide the water tank back into position
at the back of the machine, ensuring to
push down completely to lock into place.
NOTE
To purchase water filters contact
Breville Consumer Support.
5
6
Install filter in water tank
Insert & lock water tank
Publicité
