Breville the Infuser Manuel D'instructions page 14

OPERATING PAGE HEADER.....
Preset Shot Volume - 2 CUP button
Press the 2 CUP button once to extract
a double shot of espresso at the preset
volume (approx. 2oz / 60ml). The
extraction will start using the low pressure
pre-infusion (see page 15). The machine
will stop after the preset volume has
been extracted.
NOTE
Pressing the 1 CUP or 2 CUP button
during a preset shot volume will
immediately stop the extraction.
Reprogramming
Shot Volume - 1 CUP Button
To begin programming, press the
1.
PROGRAM button once. The machine
will beep once and the PROGRAM
button will begin to flash. This indicates
the machine is in programming mode.
Press 1 CUP button to start espresso
2.
extraction. Press 1 CUP button again
once desired volume of espresso has
been extracted. The machine will
beep twice to indicate the new 1 CUP
volume has been set.
14
Reprogramming
Shot Volume - 2 CUP Button
To begin programming, press the
1.
PROGRAM button once. The machine
will beep once and the PROGRAM
button will begin to flash. This indicates
the machine is in programming mode.
Press 2 CUP button to start espresso
2.
extraction. Press 2 CUP button again
once desired volume of espresso has
been extracted. The machine will
beep twice to indicate the new
2 CUP volume has been set.
Resetting Default Volumes
To reset the machine to the default 1 CUP
and 2 CUP shot volumes, press and hold the
PROGRAM button until the machine beeps
three times. Release the PROGRAM button.
The machine will return to its original
default settings.
NOTE
Default settings: 1 CUP shot volume
is approx. 1oz / 30ml. 2 CUP shot
volume is approx. 2oz / 60ml.