4.3. Charging the battery via USB
You can charge the battery either using the USB mains adapter
supplied or via a USB connection on your PC or another device
with a USB connection.
Connect the USB cable to the camera.
Connect the other end of the cable to the USB mains adapter
and plug it into the mains socket.
Alternatively, use the supplied USB cable to connect the cam-
era to the USB port of your PC or to another device with a
USB port.
The operating LED on the camera will flash during the charging
process. The operating LED will go out once the battery is fully
charged. If the operating LED flashes quickly, check the battery
and connections and switch the camera on again.
If the operating LED still flashes quickly, please contact our Ser-
vice Hotline.
PLEASE NOTE!
The battery is not charged when you purchase the
product. You need to charge the battery before you
can use the camera.
146 of 474