Ugolini NG 6 Carnet D'instructions page 19

figure 7) and then remove the container itself (see figure 8).
3 Remove the mixer by sliding it out of the evaporator
figure 7
figure 8
cylinder. Then remove the hexagonal joint (see figure 9).
4 Remove the gasket from its housing (see figure 10).
5 Disassemble the tap by following the order given (see figure
11).
6 Remove the drip tray and empty it.
7 Remove the flow restrictor from the container (see figure
19
figure 9
figure 10
figure 11