Error Messages; Recycling Instruction - Dini Argeo BCSD Serie Manuel Opérateur

10. ERROR MESSAGES

ERROR MESSAGES
- - oL - -
Err 4
Err 6

RECYCLING INSTRUCTION

The crossed-out wheeled bin on the product means that at the product end of life, it must be taken to
separate collection or to the reseller when a new equivalent type of equipment is purchased. The
adequate differentiated refuse collection in having the product recycled, helps to avoid possible
negative effects on the environment and health and supports the recycling of the materials of which
the equipment is made. The unlawful disposal of the product by the user will entail fines foreseen by
the current regulations.
DESCRIPTION RESOLUTION
Over range Remove weight from the scale.
Zero Setting Error Upon start-up or when the ZERO key is pressed, the weight on the
scale exceeds the percentage programmed on the max. capacity.
Remove the excess weight and retry.
Input signal greater Indicates that the A/D converter value is greater than the maximum
than 3mV/V value:
- Remove the weight from the scale if it's exceeding.
- The load cell or the electronics could be damaged.
21