Dini Argeo BCSD Serie Manuel Opérateur page 8

The LCD displays have symbols which show the indicator's functioning status; you will find the description for each symbol
below.
SYMBOL
Indicates that the battery is low (see section 3.3)
NET Indicates that the displayed weight is a net weight.
STABLE
Indicates that the weight is stable.
ZERO Indicates that the weight detected by the weighing system is near zero.
lb. Indicates the unit of measure in use (pounds).
kg. Indicates the unit of measure in use (kilogram)
SMPL Indicates that there are an insufficient number of samples in order to determine an accurate count (see
section 6.7).
U.WT Indicates that the average piece weight is insufficient in order to determine an accurate count (see section
6.7).
M+
Indicates that the total weight is greater than 0.
LOCAL
Indicates that the weight and the number of pieces on the local scale are being displayed.
REMOTE
Indicates that the weight and the number of pieces on the remote scale are being displayed.
CkPCS Indicates that the quantity check on the number of pieces is active.
WT Indicates that the quantity check on the net weight is active.
HIGH
OK
Managed for the QUANTITY CHECK (see section 6.9).
LOW
FUNCTION
8