Transmission Modes - Dini Argeo BCSD Serie Manuel Opérateur

9.1 TRANSMISSION MODES

The transmitted data format varies depending on the selected transmission mode (see section 7.3).
PRINT MODE
In the normal weighing operations when one is accumulating the weight the data format is the following:
When the totals are recalled from the storage the data format is the following:
Furthermore it's possible execute the transmission upon request through the serial commands (see section 9.2)
LOCAL for the local scale, REMOTE for the remote scale
<CR><LF>
USER ID (see section 7.4)
<CR><LF>
Description of selected article
<CR><LF>
Net weight
Average piece weight
<CR><LF>
Number of pieces
<CR><LF>
Total net weight accumulated in the memory storage
Total number of pieces accumulated in the memory storage
Progressive of totalisations
<CR><LF>
<CR><LF>
LOCAL for the local scale, REMOTE for the remote scale
Total net weight accumulated in the memory storage
Total number of pieces accumulated in the memory storage
Progressive of totalisations
<CR><LF>
18