Introduction; Unpacking And Control; About This Manual; User's Responsibility For Safety - Burkert 8020 Notice D'utilisation

1 INTRODUCTION

Dear Customer,
Congratulations on your purchase of our
8020 flow sensor.
BEFORE INSTALLING OR USING THIS
PRODUCT, PLEASE TAKE OUR ADVICE
AND READ THE ENTIRE MANUAL
THOROUGHLY.
This will enable you to fully profit from all of
the advantages offered by this product.

1.1 Unpacking and Control

Please verify that the product is complete
and free from any damage. The standard
delivery must include:
-1 Flow Sensor type 8020
-1 Operating Instruction Manual 8020
-1 Operating Instruction Manual
fitting type S020/1500/1501
Compare the type specification on the label
to the adjacent list to ensure that you have
received the proper unit. If there is any loss
or damage, please contact your local Bürkert
subsidiary.

1.2 About this Manual

This manual does not contain any warranty
statement. Please refer to our general terms
of sale and delivery.
Only properly-trained staff should install and/
or repair this product. If difficulties
should occur at the time of installation,
please contact your nearest Bürkert sales
office for assistance.
FLOW SENSOR TYPE 8020

1.3 User's Responsibility for Safety

Bürkert manufactures a broad range of flow
sensors. While each of these products is
designed to operate in a wide variety of
applications, it is the user's responsibility to
select a transmitter model that is appropriate
for the application, install it properly, and
maintain all components. Special attention
must be paid to the chemical resistance of
the transmitter against the fluids which are
directly contacting the product.
This symbol appears in the manual
!
to call special attention to
instructions that affect the safe installation,
function and use of the product.

1.4 Electromagnetic Compatibility

This confirms that this product meets the
main protection requirements as laid down
in the Council Directive on the harmonization
of the laws of the Member States relating
to electromagnetic
(89/336/EEC).
E-2-
compatibility
8020