Guided Tour - Ax1 Handheld Transmitter - Samson AirLine AX1 Mode D'emploi

Samson AirLine
1: XLR connector - Connect this standard female XLR connec-
tor into any standard wired dynamic microphone in order to
make it a wireless mic.
2: Rubber gasket - If necessary, use this provided rubber gasket
in order to make a solid connection between the AX1 XLR
connector and your microphone (note that not all microphones
require its use).
3: Power on-off switch - Move this switch in the direction of
the arrow to turn power to the AX1 on; move it away from the
arrow to turn power off. (to con-
serve
turn the AX1 off when not in use).
Be sure to mute the audio signal at
your external mixer or amplifier
before turning the AX1 power on or
off, or an audible pop may result.
4: Power / Battery LED - This LED
flashes once when the AX1 is first
turned on and lights steadily red
when there is less than 2 hours of
battery power remaining, indicating
that the battery needs to be changed.

Guided Tour - AX1 Handheld Transmitter

battery power, be sure to
6