Samson AirLine AX1 Mode D'emploi page 7

Guided Tour - AM1 Receiver
LEVEL
LINE MIC
+
_
5
Samson AirLine
7: Hot Shoe Clip/Belt Clip - The AM1 is shipped with
the Belt Clip mounted to the rear of the receiver. The
hot shoe clip (included with hardware) can be fixed
to the rear of the AM1 to mount the receiver to the
hot shoe of your camera. To fasten the hot shoe clip
to the receiver, first remove the phillips head screw
and belt clip, then secure the hot shoe clip with the
supplied phillips head screw.
8: Battery Compartment - Insert a standard AAA alka-
line battery here, being sure to observe the plus and
minus polarity markings shown.
WARNING: Do not insert the battery
backwards; doing so can cause severe
damage to the AM1 and will void your
warranty.
9: Antenna - Receives RF signal from
the transmitter. Once you have
selected the placement of the
receiver the antenna should be
turned to be in a vertical position
for optimum reception.