Checchi & Magli AL-S14 PLUS Manuel D'utilisation Et D'entretien page 63

Unpacking
Unpack the parcel on solid, hazard-free ground.
The staff assigned to handling the load must have the
required ability and experience and must be skilled in
the use of the lifting means adopted.
During unpacking, check that the components are in
Unpacking machines on pallets______________________________________________________________________
Danger - Warning
Unpacking the machines while still on the pallets
constitutes a source of risk.
Take special care to ensure the safety of everyone di-
rectly involved in the operations.
Lift the packed machine using appropriate hoisting
means for the load to lift.
Check the "Technical information" section to find the
weight of the machine to be lifted.
Unpacking machines without pallets__________________________________________________________________
Proceed as outlined below.
1) Remove the nylon guard.
Lifting the work vehicle
Danger - Warning
Lift the work vehicle using appropriate hoisting
means for the load to lift.
Check the "Technical information" section to find the
weight of the machine to be lifted.
The illustration shows the harnessing points and the
procedures for lifting the AL model.
English language
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
15
good condition and tally with the number stated; in the
event of damage, report the damage to the retailer or
directly to the manufacturer within 8 days of receiving
the machine.
The packing materials must be appropriately disposed
of or recycled in accordance with the laws in force.
Proceed as outlined below.
1) Remove the nylon guard.
2) Remove any clamps securing the machine to the pal-
let.
3) Harness up the machine and lift it.
The AL-S14 PLUS is placed on the pallet packed in
two separate parcels which must be strapped up and
lifted individually.
4) Lower the machine, turning it at the same time, and
set it down on the ground in a horizontal position.
5) Remove the hooking elements used for lifting.
2) Remove the hooking elements used for lifting.
During lifting and handling operations anyone not in-
volved must keep a safe distance.
UN41-0305LI
4
AL
Use and maintenance