Cruise Control - EMAK CHEYENNE 92 Manuel D'utilisation Et D'entretien

(4) Mowing deck engagement switch
Pressing the part with the symbol engages the mowing deck. Pressing the part without the symbol
disengages the mowing deck.

(5) Cruise control

Cruise control is only used when travelling in a long straight line. Before any change in direction it is
necessary to deactivate the cruise control.
(6) Deactivation of the mowing deck disengagement for reversing
Switch R serves to disengage the automatic mowing deck disengagement function when reversing
( 5.5.1).
(7) Brake pedal
ENGAGED
DISENGAGED
Cruise control is active only when the ignition is turned on.
Cruise is disengaged by stepping down on brake pedal or turning off the
switch.
The switch needs to be pressed when the mowing deck has already been
automatically disengaged but the blades have not yet stopped rotating
(approx. 4 seconds) or when the mowing deck is started immediately before
the reverse travel pedal is stepped on. Then with every subsequent change
in the travel direction from reverse to forward, the disengagement of the
mowing deck is again reactivated.
Pressing the brake pedal will slow down the riding mower.
Never use the brake at the same time as the drive function – there is
a danger of damaging the transmission!
Engagement of the mowing deck / the mowing
deck is engaged
Disengagement of the mowing deck / the
mowing deck is disengaged
77