Stopping - Emergency Stopping; Emptying The Container - Nilfisk 118 Manuel D'instructions

118 - 118 L, M, H

Stopping - Emergency stopping

Push the button "A" - fig. 4.

Emptying the container

DANGER !
Before proceeding with these operations, turn off
the vacuum cleaner and remove the plug from the
power socket.
Check the class of the vacuum cleaner.
- Before emptying the container it is advisable
to clean the filter (see "Shaking the main filter"
paragraph).
a) Normal version, not suitable for vacuuming
hazardous dust
- Release the dust container "A" (fig. 10), then
remove and empty it.
- Make sure that the gasket is in perfect condition
and correctly positioned.
- Place the container back in position and secure it
again.
Plastic bag
A plastic bag can be used to collect dust (code 8 40099)
(see fig. 8).
In this case, the vacuum cleaner must be equipped
with optional accessories (depressor and grid - fig. 8).
Paper bag
A paper bag "A" - fig. 9 can be used to collect dust. In
this case, the vacuum cleaner must be equipped with
optional accessories (dust container "B" and plug "C"
- fig. 9).
b) Versions for dusts harmful to health
Classes M - H suitable for vacuuming hazardous
and/or carcinogenic dust.
GB
C76
DANGER !
- These operations can only be carried out by
trained and qualified personnel who must wear
adequate clothing, in compliance with the laws
in force.
- Take care not to raise dust when this operation
is carried out. Wear a P3 protective mask.
- In order to dispose of dusts that are dangerous
and/or hazardous to health, a plastic bag (code
40100) or an ABS safety container (code 8
30202 - 8 31685) can be used.
- The container and/or bag must only be
disposed of by qualified personnel and in
compliance with the laws in force.
How to replace the safety container
- Place the vacuum hose in a safe and dust-free
place;
- release the dust container "I" (fig. 13);
- close the safety container with the supplied cover,
remove it from the dust container "I" (fig. 13), and
replace it with an empty one.
- Start the motor again to prevent dust from being
blown about.
- Make sure that the gasket is in perfect condition
and correctly positioned.
- Switch off the motor, fit an empty container in
place and fasten it in position.
8
10/2007