Recommended Spare Parts; Troubleshooting; Manufacturer Service Centre - Nilfisk 118 Manuel D'instructions

118 - 118 L, M, H

Recommended spare parts

The following is a list of spare parts that should be kept ready at hand in order to speed up maintenance operations
(fig. 19).
List of recommended spare parts (fig. 19)
Pos.
1
2
3
4 Single-phase motor 1000 W
5 Filter ring gasket
6
7 Absolute filter "H"
8 Container/cover

Troubleshooting

Problem
The vacuum cleaner does not
start
The vacuum cleaner revolutions
increase
Dust leaks from the vacuum
cleaner
Noisy suction motor
Electrostatic current on the
vacuum cleaner
GB

Manufacturer Service Centre

Please consult the appendix.
C76
Description
Star filter "L"
Star filter "M"
Filter ring
Filter clamp
Lack of power supply
Clogged primary filter
Clogged vacuum hose
The filter is torn
Inadequate filter
Worn or broken carbon brushes
Non existent or inefficient
grounding
Mod.
118 - 118 L
118 M - 118 H
118 - 118 L, M, H
118 - 118 L, M, H
118 - 118 L, M, H
118 H
118 L, M, H
Cause
12
Dim. Code number
Ø 360 8 17079
Ø 360 8 17244
Ø 360 8 15002
8 54002
Ø 360 8 17025
Ø 360 8 18078
Ø 170 8 17262
Ø 360 8 30201 + 8 31377
Remedy
Check for power at the socket
Check the condition of the socket and
the cable
Ask for assistance to be performed by a
qualified manufacturer's technician
Shake the filter. Replace it if this is not
sufficient
Check the vacuum hose and clean it
Replace it with another of identical type
Replace it with another of suitable type
and check
Remove and replace the motor carbon
brushes
Check all grounding, particularly the
union to the inlet; moreover, the hose
must be strictly antistatic
10/2007