Optional Kits; Accessories; Packing And Unpacking; Setting To Work - Connection To The Power Supply - Nilfisk 118 Manuel D'instructions

118 - 118 L, M, H

Optional kits

The following optional kits are available for converting
the vacuum cleaner:
- grill and depressor;
- dust container in a paper bag.
On request, the vacuum cleaner can be supplied with
optional kits already installed. However, they can also
be installed at a later date.
Please contact the manufacturer's sales network for
further details.
Instructions describing how to fit the optional kits and
the relative operation and maintenance manuals are
supplied together with the optional kits.
DANGER !
Use only genuine optional kits supplied and
authorized by the manufacturer.

Accessories

Various accessories are available; refer to the
manufacturer's accessory catalogue.
DANGER !
Use only genuine accessories supplied and
authorized by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with
the laws in force.
Cardboard box packing (fig. 2)
Model 118 - 118 L, M, H
A (mm)
B (mm)
C (mm)
Weight with packing (kg)
GB
C76
Setting to work - connection to the power
supply
- Make sure that the vacuum cleaner is in
perfect condition before starting work.
- Before plugging the vacuum cleaner into the
electricity mains, make sure that the voltage
rating indicated on the data plate corresponds
to that of the electricity mains.
- Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
- Make sure that the vacuum cleaner is off.
- The plugs and connectors of the connection
cables must be protected against splashed
water.
- Make sure that connections to the electricity
mains and plug are correct.
- Use the vacuum cleaners only when the cables
that connect to the electricity mains are in
perfect condition (damaged cables could lead
to electric shocks!).
- Regularly check that the electric cable does
not show signs of damage excessive wear,
cracks or ageing.
When the vacuum cleaner is operating, do not:
- crush, pull, damage or tread on the cable that
connects to the electricity mains;
- only disconnect the cable from the electricity
mains by removing the plug (do not pull the
cable).
600
- only replace the electric power cable with one
600
of the same type as the original: HO7 RN - F.
The same rule applies if an extension is used.
1,000
- the cable must be replaced by the
33
manufacturer's Service Centre staff or by
equivalent qualified personnel.

DANGER !
DANGER !
10/2007