Binary (Bitwise) Displaying And Changing Of The Cv Value - Lenz Digital plus LH101 Mode D'emploi

Configuring (programming) decoder settings
Now, you have the following options:
a)
or
b)
or
c)
or
d)

13.3.4.1 Binary (bitwise) displaying and changing of the CV value

There are two different ways of entering (or displaying) the desired
value in the CV: Decimal or bitwise (binary). You can choose your
preferred method. However, there are CVs for which bitwise entry is
easier; for other CVs decimal entry is the recommended.
Example:
In CV29, decoder settings are configured by setting or deleting bits.
Here, bitwise entry is recommended.
First, read out the content of the desired CV. Proceed as described in
the section "Reading out and programming a CV", page 74.
... press the 'locomotive' key to
complete the entry process.
The CV is read out and the result
displayed.
Enter another value in the CV
change to the binary display (and
changing the value)
select another CV
return to "Controlling locomotive".
75