Lenz Digital plus LH101 Mode D'emploi page 226

106
15.5 Read / write service variables (SV)
Service variables are settings that can be made in the LZV200. For
example, the baud rate of the interface integrated in the LZV200 can
be set.
Which service variables are available and what they are used for is
described in the operating manual of the LZV200.
Action Display
Proceed from "Controlling a locomotive"...
... press the 'M' button.
Turn the knob until the "Setup System" option
is displayed.
Pressing the rotary knob selects this option.
Turn the knob until the "Service variable
read/write" option is displayed and confirm
your selection by pressing the knob.
You are prompted to enter the number of the
SV you want to read or change (write).
Enter the number of the desired SV (in the
example SV2, baud rate of the interface).
Confirm the number entry with the 'Lok' key.
The current setting of the SV is displayed.
You can now delete the displayed value ...
... and enter a new one.
Operating manual LH101
Explanation