Setting The Alarm Clock Function - Roche Accu-Chek Performa Manuel De L'utilisateur

TIME / DATE
(hrs, min, day,
month, year)

Setting the Alarm Clock Function

One to four alarms can be set per day. The meter beeps every two minutes – up to three
times. Turn the alarm off by inserting a test strip or pressing any button. The beeper must
be set to "On" for the alarm to sound.
The meter is preset with the alarm clock function set to "OFF." It must be turned "On" to
44
use this feature.
If A-1, A-2, A-3, and A-4 are turned on, the meter is preset with the following times which
can be adjusted as necessary.
A-1 8:00
Notes:
• I f a test was performed within 30 minutes of an alarm, the alarm does not occur.
• I f the meter is on at the alarm time, the alarm does not occur.
• E xposure to cold conditions may disable alarms until the meter is turned on.
BEEPER
(on/off)
A-2 12:00
You are here
ALARM CLOCK
(A-1, A-2, A-3, A-4)
A-3 18:00
HYPO ALARM
(off, on, level)
A-4 22:00