Setting The Alarm Clock Function - Roche ACCU-CHEK Aviva Manuel De L'utilisateur

TIME / DATE
(hrs, min, am/pm,
month, day, year)

Setting the Alarm Clock Function

The alarm clock function is a handy way to remind you to test. You can set 0 to 4 alarms per day.
The meter beeps every two minutes—up to three times. You can turn the alarm off by inserting a
test strip or pressing any button. You must have the beeper set to "On" for the alarm to sound.
Your meter is pre-set with the alarm clock function set to "OFF." You must turn it "On" to use this
feature.
If you turn A-1, A-2, A-3, and A-4 on, your meter is pre-set with the following times for your
convenience. You can adjust the times to suit your testing schedule.
A-1 8:00 am A-2 12:00 pm (noon)
Notes:
• If you tested within 30 minutes of an alarm, the alarm does not occur.
• If the meter is on at the alarm time, the alarm does not occur.
• Exposure to cold conditions may disable alarms until the meter is turned on.
Chapter 3
BEEPER
(on/off) (A-1, A-2, A-3, A-4)
A-3 6:00 pm
34
You are here
ALARM CLOCK
A-4 10:00 pm
HYPO ALARM
(off, on, level)