Roche Accu-Chek Performa Manuel De L'utilisateur page 54

4. Locate the infrared (IR) window on the top of the meter.
5. Locate the IR window on either the infrared cable
(computer) or PDA.
6. Put the meter on a flat surface. Point the two IR windows
toward each other. They should be 3 to 10 cm apart.
7. Do not move the infrared cable (computer), PDA, or meter
during the transfer.
8. Follow the prompts on the software.
52 9. The software program may shut off the meter automatically
when the data transfer is complete.
Notes:
• I f the data did not transfer successfully, try again. Contact Roche if problems persist.
• B e sure to set the time and date in the meter for traceability of results.
Infrared (IR)
Window