Meter Setup - Roche Accu-Chek Performa Manuel De L'utilisateur

Meter Setup

Using the Set-up Mode
The following features can be adjusted as required.
Time and Date – set the time and date.
Beeper – select "On" or "OFF."
Alarm clock – select "On" or "OFF." If "On" is chosen, select 1 to 4 alarms per day.
H ypo alarm – select "On" or "OFF." If "On" is chosen, select the blood glucose level for
the alarm.
The has three functions for the set-up mode.
• T o enter the set-up mode, turn the meter on then press and hold
on the display. This takes about four seconds.
• Press and release
• T o exit the set-up mode at any time, press and hold
flashing test strip symbol appears on the display.
to set the selected option.
until "set-up" flashes
for about four seconds until the
37