Sewing - Dürkopp Adler 271 Manuel D'utilisation

7

Sewing

Sewing operation
Before starting to sew
Initial position
Positioning the workpiece
at beginning of seam
Start seam
at beginning of seam
Start seam
without start backtack
34
The following preconditions are assumed while describing the sewing
operation:
–
The following functions are set at the control panel:
Start backtack and final bartack:
Sewing foot position before and after cutting:
Needle position before cutting:
–
Main switch switched on.
–
The last sewing operation has been concluded with final bartack
and thread cutting.
Operating sequence and function sequence while sewing:
1
Operation / Explanation
Pedal in idle position.
Sewing machine is at standstill.
Needle is up. Sewing foot is down.
- Step backwards on the pedal.
The sewing foot lifts.
- Position the workpiece.
- Release the pedal.
The sewing foot is lowered on the workpiece.
- Step forward on the pedal and hold in that position.
The start backtack is sewn.
Subsequently, the machine continues to sew with the
speed determined by the pedal.
- Press button 1 (tack suppression).
- Press forward on the pedal.
- The machine sews with the speed
determined by the pedal.
DOWN (Position 1)
I-0
0-I
2
ON
DOWN