Subclasses - Dürkopp Adler 271 Manuel D'utilisation

3

Subclasses

6
Basic type Single needle lockstitch machine with lower feed
and thread cutter for light-weight and medium
weight fabric, with 4 mm stitch length and
integrated sewing machine drive (Direct Drive).
Cl. 271-140342 Like the basic type, but with electro-magnetic
automatic locking and electro-magnetic sewing
foot lift, electro-magnetic thread clamping
magnet, a motor control unit (including connecting
line) corresponding to the drive motor built onto
the sewing machine (Direct Drive) and sealed
needle bar.
Standard equipment with keys for locking within
the seam progression, for needle high-low, single
stitch and tack call up or suppression.
Equipped with a direct drive HoHsing HVP
70-4-ED-CE.
including manual locking
Cl. 271-140342-01 Like the basic type, but with electro-magnetic
automatic locking and electro-magnetic sewing
foot lift.
Drive motor (Direct Drive) HoHsing
M1-50-AB431-CE built onto the machine head
with connector for DAC controls.
Motor control unit DAC basic including control
panel OP 1000 and fastening angle.
Electro-magnetic thread clamping magnet.
Standard equipment with keys for locking within
the seam progression, for needle high-low, single
stitch and tack call up or suppression.
Cl. 272-140342 Like the basic type with 4 mm stitch length,
electro-magnetic automatic locking,
electro-magnetic sewing foot lift, a drive motor
(Direct Drive) built onto the machine,
corresponding motor control unit (incl. connecting
line) and an electro-magnetic thread clamping
magnet.
Standard equipment with keys for locking within
the seam progression, for needle high-low, single
stitch and tack call up or suppression.
Equipped with a direct drive Efka DC
1500-DA220C.
Including manual locking.
Cl. 272-140342-01 Like the basic type, but with electro-magnetic
automatic locking and electro-magnetic sewing
foot lift.
Drive motor (Direct Drive) HoHsing
M1-50-AB431-CE built onto the machine head
with connectors for DAC controls.
Motor control unit DAC basic including control
panel OP 1000 and fastening angle.
Electro-magnetic thread clamping magnet.
Standard equipment with keys for locking within
the seam progression, for needle high-low, single
stitch and tack call up or suppression.