Remote Commander - Sony VPL-PX1 Mode D'emploi

Location and Function of Controls

Remote Commander

The keys which have the same names as on the
control panel function identically.
You can control a connected computer using the
Remote Commander.
For details, see "Connecting with a Computer" on page
14 (GB).
qj qk
qh
COMMAND
OFF ON
qg
MUTING
AUDIO PICTURE
qf
APA
qd
MENU
qs
ENTER
qa
RESET
VOLUME
+
–
9,0
Notes on laser beam
• Do not look into the laser transmitter.
• Do not aim the laser at people.
1 I / 1 key
2 INPUT key
3 LASER key
Emits laser beam from the laser transmitter when you
press this key.
4 Joy stick
Functions as a mouse of a computer connected to the
unit.
5 Arrow keys (M/m/</,)
.........................................................................................................................................................................................................
1) Macintosh is a registered trademark of Apple Computer, Inc.
12
(GB)
I / 1
1
INPUT
2
LASER
3
4
5
ql
R CLICK
6
7
8
6 R CLICK key
Functions as a right button on a mouse. When
connected to a Macintosh
key functions as a mouse button.
7 RESET key
8 VOLUME +/– keys
9 Strap holder
Attaches the supplied strap.
0 CONTROL S OUT jack (stereo minijack)
This jack does not operated with this unit.
Note
The Remote Commander does not function if the
cable is connected to this jack.
qa ENTER key
qs MENU key
qd APA (Auto Pixel Alignment) key
qf MUTING keys
Cut off the picture and sound.
PICTURE: Cuts off the picture. Press again to
restore the picture.
AUDIO: Cuts off the sound from speakers and
AUDIO OUT jack. Press again or press the
VOLUME + key to restore the sound.
qg COMMAND ON/OFF switch
When this switch is set to OFF, no key on the Remote
Commander function. This saves the battery power.
qh Transmission indicator
Lights up when you press a key on the Remote
Commander.
This indicator does not light up when you use the laser
pointer.
qj Infrared transmitter
qk Laser transmitter
1)
computer, the R CLICK