Battery Information System; Checking The Battery Charge State; Checking The Battery Capacity - Raleigh Pedelec Mode D'emploi

Long charging times
-10 °C
Charging times at different temperatures
6.4

Battery information system

There is a control panel with five LEDs and a button
("Push") on the side of the battery that faces outwards.
The LEDs light up if you press the "Push" button. Informa-
tion about the battery and its charge state is provided
based on the number of LEDs that light up and the way in
which they light up.
Charge state and battery capacity indicator
Optimum temperature range
for charging operation
0 °C 10 °C 20 °C
Battery may be
damaged
30 °C 40 °C

6.4.1 Checking the battery charge state

Press the "Push" button briefly, the LEDs light up and dis-
play the current battery charge state.
DISPLAY
5 LEDs light up •••••
4 LEDs light up ••••
3 LEDs light up •••
2 LEDs light up ••
1 LED lights up •
1 LED flashes
¡
no display –
E: Battery is empty
F: Battery is full

6.4.2 Checking the battery capacity

If you press the "Push" button for longer than five sec-
onds, the LEDs show the current capacity of the battery.
DISPLAY
5 LEDs light up •••••
4 LEDs light up ••••
3 LEDs light up •••
2 LEDs light up ••
1 LED lights up •
Capacity of 18 Ah battery (example)
IV User Manual Pedelec with front motor
50 °C
BATTERY CHARGE STATE
80 – 100%
60 – 80%
40 – 60%
20 – 40%
10 – 20%
< 10%
0%
CAPACITY
100 – 80%
80 – 60%
60 – 40%
40 – 20%
20 – 0%
15