Connecting A Tv; Composite Video Connection; Component Video Connection - Yamaha DRX-730 Mode D'emploi

Chapter 2: Getting Started

Connecting a TV

You can connect the DRX-730 to a TV by using any
one of four different connection types: HDMI,
component video, or composite video. The type you
choose will depend on the connections supported by
your TV. Refer to your TV owner's manual for details.
HDMI provides the best picture quality. Component
video offers the next best picture quality and the
DRX-730's component video output supports
progressive scanning for even better picture quality. If
your TV doesn't support HDMI or component video,
use composite video. Some DRX-730 models have a
SCART jack that can output composite video or RGB
component video.
Notes:
• Do not connect the power cable to the DRX-730
until all other connections have been completed.
• Turn off your TV before connecting it to the
DRX-730.
Tip:
• If your TV has an audio output, you can connect it
to the DRX-730's AUX IN jacks and listen to your
favorite TV programs through the speakers
connected to the DRX-730.

Composite video connection

If your TV doesn't support HDMI or component
video, you can connect the DRX-730 to your TV with
the supplied video pin cable.
Use the supplied video pin cable to connect the
DRX-730's VIDEO OUT jack to a composite video
input on your TV.
MAINS
HDMI
CLASS 2 WIRING
CABLAGE CLASSE 2
R
6 MIN SPEAKER
SUBWOOFER OUT
SPEAKERS OUT AUX
TV
12
En
AM
ANT
GND
FM
ANT
75
UNBAL.
P P
R B
Y
R OUT
VIDEO COMPONENT
IN OPTICAL
DOCK VIDEO OUT DIGITAL
Video pin cable
(supplied)
IN
VIDEO

Component video connection

If your TV supports component video but not HDMI,
you can connect the DRX-730 to your TV with a
component video cable. This will provide better
picture quality than a composite video connection.
Using a component video cable (sold separately),
connect the DRX-730's COMPONENT VIDEO OUT
jacks to a component video input on your TV.
MAINS HDMI
CLASS 2 WIRING
CABLAGE CLASSE 2
R
6 MIN SPEAKER
SUBWOOFER OUT IN
SPEAKERS OUT AUX
Component video cable
(sold separately)
TV
Notes:
• If you connect a TV that does not support
progressive scanning, make sure the Component
Out setting is set to Interlace. If it's set to
Progressive, the TV may display no picture.
• If you use the COMPONENT VIDEO OUT and
HDMI connections simultaneously, the
COMPONENT VIDEO OUT jacks may output
progressive video regardless of the Component
Out setting.
AM
ANT
GND
FM
ANT
75
UNBAL.
P P
R B
Y
R
OUT
VIDEO COMPONENT
OPTICAL
DOCK VIDEO OUT DIGITAL
COMPONENT
VIDEO IN
Y P P
B R