Connecting A Recorder (Cdr, Mdr, Etc.); Digital Recording; Connecting An Av Receiver Or Decoder - Yamaha DRX-730 Mode D'emploi

Chapter 2: Getting Started
Connecting a recorder (CDR,
MDR, etc.)
You can connect a recording component, such as a
CDR, MDR, or casette recorder, to the DRX-730 for
recording and playback.
1
Using an audio pin cable (sold separately),
connect the DRX-730's AUX OUT jacks to the
audio input on your recording component.
2
Using another audio pin cable (sold
separately), connect the DRX-730's AUX IN
jacks to the audio output on your recording
component.
HDMI
P
R
R
VIDEO COMPONENT
SUBWOOFER OUT IN
OUT AUX DOCK VIDEO OUT
Audio pin
cables (sold
separately)
AUDIO OPTICAL
DIGITAL
IN OUT
IN
L
R
■

Digital recording

If your recording component has an optical digital
input, you can connect it to the DRX-730's OPTICAL
DIGITAL OUT jack and record digitally.
See "Recording" on page 49 for more details.
Notes:
• Do not connect the power cable to the DRX-730
until all other connections have been completed.
• Turn off the recording component before
connecting it to the DRX-730.
• The OPTICAL DIGITAL OUT outputs audio
only when the input source is DVD or USB, and
with some discs and files, recording may not be
possible due to copy protection.
14
En
AM
ANT
GND
FM
ANT
75
UNBAL.
P
B
Y
OUT
OPTICAL
DIGITAL
Optical cable
(sold separately)
Recording component
(CDR, MDR, casette deck)
Connecting an AV receiver or
decoder
The DRX-730 downmixes multi-channel sources,
such as Dolby Digital and DTS, into a 2-channel
stereo mix that you can enjoy through the speakers
connected to the DRX-730. By connecting an AV
receiver/decoder to the DRX-730's OPTICAL
DIGITAL OUT jack, you can enjoy Dolby Digital and
DTS sources though the speakers connected to your
AV receiver/decoder.
Using an optical digital audio cable (sold
separately), connect the DRX-730's OPTICAL
DIGITAL OUT jack to a digital optical input on the
AV receiver/decoder.
Notes:
• Make sure the digital audio output settings are
configured so that the OPTICAL DIGITAL OUT
outputs MPEG, Dolby Digital, and DTS material
as it is and not as PCM.
• You may want to turn down the volume on the
DRX-730 all the way when listening through the
speakers connected to your AV receiver/decoder.
• The OPTICAL DIGITAL OUT outputs audio
only when the input source is DVD or USB.
MAINS HDMI
CLASS 2 WIRING
CABLAGE CLASSE 2
R
6 MIN SPEAKER
SUBWOOFER OUT
SPEAKERS OUT AUX
Optical cable
(sold separately)
AV receiver/decoder
AM
ANT
GND
FM
ANT
75
UNBAL.
P P
R B
Y
R
OUT
VIDEO COMPONENT
OPTICAL
IN
DOCK VIDEO OUT DIGITAL
OPTICAL
DIGITAL
IN