Table des Matières
Publicité
Janome Jem Gold Instruction Manual
q
w
w
q
e
q
w
r
www.toews.com
e
w
q
r
e
42
Blind Hem Stitch
Machine setting
q Stitch selector:
w Needle thread tension:
e Presser foot:
Use the same color thread as the fabric.
On heavy weight fabrics that ravel, the raw edge should
be overcast first.
Fold the hem, as illustrated.
q Wrong side (Bottom side) of fabric
w 1/4˝-7/16˝ (0.4-0.7 cm)
e Heavy weight fabric
r Light weight fabric
Position the fabric, so that the needle at its leftmost
position just pierces the edge of the fold.
After hemming is completed, press together both sides of
the finished hem. The top side of the fabric should show
only the blind stitches.
Button Sewing
Machine setting
q Stitch selector:
w Needle thread tension:
e Presser foot:
r Feed dog:
1. Drop the feed dogs. Place the button below the
zigzag foot, making sure to align the holes with the
horizontal slot in the foot. Lower the presser foot to
hold the button in place.
2. Determine which stitch width setting matches the
distance between the button holes. The needle must
go safely through each hole when sewing.
Unthread the needle to help you determine the
zigzag width.
3. Thread the needle. Turn the handwheel, so that the
needle is in its leftmost position, and then drop the
needle through the left buttonhole.
4. Press the foot control and sew about 10 stitches.
5. Sew the other row of holes (if applicable) using the
steps above. Trim excess threads from both sides of
the fabric.
Jem Gold Owners Manual/ User Guide
Janome Sewing Machine
2 – 6
Zigzag foot: A
3 – 7
Zigzag foot: A
Dropped
Publicité
Table des Matières
