Scroll The Frozen Image; Power Saving Mode; Color Mode Selection - Optelec ClearView GO Manuel D'utilisation

Optelec

5.4. Scroll the frozen image

If you press and hold the Natural color button(⑥) when looking at a
frozen image, an indicator will appear on the screen to show which area
you're looking at.
If you press the Zoom wheel(④) when looking at a frozen image a
horizontal line will appear, this can be moved by turning the Super
Function Key(⑦).
You can pan around the frozen image using the Super Function
Key(⑦).
When you scroll to the end of the screen, press the direction you'd like to
move to next using the Super Function Key(⑦) again to automatically
advance to the next paragraph or line.
If you press the center of the Super Function Key(⑦) you will
automatically advance to the next paragraph or line.

5.5 Power saving mode

If you leave the unit turned on and unused for 10 minutes, it
automatically goes into the Power saving mode. If the unit is left for 3
minutes after entering the Power saving mode, power is automatically
switched off.

5.6 Color mode selection

Press and hold the color mode button (⑤) and rotate the Zoom wheel
(④) to cycle through the available color modes.
 Color mode button (⑤) + Zoom wheel (④, Right): Next color
mode
 Color mode button (⑤) + Zoom wheel (④, Left): Previous color
mode
19
ClearView GO
English