Additional Information; Mounting The Base Unit On A Wall - Sony SPP-S9101 Mode D'emploi

Additional Information

Mounting the base unit on a wall

1
2
AC power
adaptor cord
3
Wall
bracket
Tip
To remove the wall bracket, press the lower tabs.
US
38
Additional Information
Hang-up tab
Telephone
line cord
1
2
Wall
plate
AC outlet
1
Raise the hang up tab.
2
Plug the telephone line cord to
the LINE jack and the AC power
adaptor to the DC IN 9V jack,
and hook the cords. Use the
shorter cord for mounting.
3
Attach the wall bracket to the
center of the base unit.
Align the f marks of the wall
bracket with those of the base
unit.
4
Plug the telephone line cord to
the telephone outlet, and hook
the base unit to the wall plate.
5
Plug the AC power adaptor to
an AC outlet. Then raise the
antenna so that it points
towards the ceiling.
4,5
AC power
adaptor
Telephone
line cord