Install Wall Box - EVBOX WALL BOX 9835663180 Manuel D'installation

Part number: 9835663180
EN

4. Install wall box

Tools you need to install the wall box
No specific tools needed for this step.
Before mounting, write down the ID of your wall box.
This can be found on the backside of the wall box and in the
cardboard folder containing the RFID card and key fob.
5.1
Align the wall box against the wall dock and press it in a straight
line until you hear a clicking sound.
To ensure that the connection is fully secured, press firmly on all
four corners and check that there is no air gap between the wall
dock and the wall box.
5.2
18
INSTALLATION_WALL_BOX_PSA_B2C_MERGED.indd 18
Switch on the power to the wall box on the
WALL BOX
service panel. The wall box will switch on
automatically. This is indicated by a flashing
red LED ring.
Do not turn on the power to the wall box
SMART
before wall box activation.
WALL BOX
Give the cardboard folder to the user and
ask them to activate the wall box.
11-9-2019 8:31:32