Activate Wall Box - EVBOX WALL BOX 9835663180 Manuel D'installation

Part number: 9835663180

5. Activate wall box

Tools you need to activate the wall box
Note: You can use your smart wall box also without RFID card/key fob.
For regular wall box models, the activation of the wall box is not applicable.
The EVBox Connect App is designed for both installers and users and to adjust the wall box settings
(e.g. setting of maximum amperage or adding/activating RFID cards/key fobs).
To find out more about the App features, please refer to the EVBox Connect App manual.
The Smart Wall Box App is a management App for electric vehicle charging stations.
The App allows both charging station owners and electric vehicle drivers to easily start/stop, track
and invoice charging sessions. It also enables station owners to take full control over the energy
consumption of their charging stations.
For more information about the App features, please refer to the Smart Wall Box App manual.
Please refer to the table on next page for the step-by-step instructions for both Apps.
Please refer to
INSTALLATION_WALL_BOX_PSA_B2C_MERGED.indd 19
ifz-berlin.de/#/instructions
EVBox Connect App
Smart Wall Box App*
*Applicable for Smart Wall Box only
for the latest manuals.
EN
19
11-9-2019 8:31:34