Install Wall Box - EVBOX WALL BOX Manuel D'installation

Part number: 9835663080

3. Install wall box

Tools you need to install the wall box
No specific tools needed for this step.
Before mounting, write down the ID of your wall box.
This can be found on the backside of
the cardboard folder containing the RFID card and key fob.
5.1
Align the wall box
straight line until you hear a clicking sound.
To ensure that the connection is fully secured, press firmly on all
four corners and check that there is no air gap between the wall
dock and the wall
5.2
INSTALLATION_WALL_BOX_SOCKET_PSA_B2C_MERGED.indd 17
the wall box and in
against the wall dock and press it in a
box.
WALL BOX
SMART
WALL BOX
CLICK
Switch on the power to the wall box on the
service panel. The wall box will switch on
automatically. This is indicated by a flashing
red LED ring.
Do not turn on the power to the wall box
before wall box activation.
Give the cardboard folder to the user and
ask them to activate the wall box.
11-9-2019 8:30:06
EN
17