EVBOX WALL BOX Manuel D'installation page 22

Part number: 9835663080
EN
6. Remove wall box
Tools you need to remove the wall box
Warning: Risk of electric shock.
Before removing the wall box from its wall dock, make
sure that the power line you're using is switched off on
CLICK
your service panel. The LED ring of the charging plug
must be off.
7.1
Take out the keys from the folder in the box.
Insert the keys into the slots in the bottom of the wall
dock. This releases the snap-fit connection of the the
wall box to the wall dock. Make sure to push them in
until they only stick out approx. 50 mm and cannot be
pushed in any further.
Now you can remove your wall box from the wall dock.
Pull the wall box away from the wall dock in a straight
line.
Important: Do not twist or skew the
wall box, as that
might damage the snap fits and/or connectors of the
wall box.
Be aware that the the wall box is still fixed on the
connector (socket) of the wall dock and it requires
some force to pull it off.
Take out the keys from the wall dock.
23
INSTALLATION_WALL_BOX_SOCKET_PSA_B2C_MERGED.indd 23 11-9-2019 8:30:12