Unpack Wall Box - EVBOX WALL BOX Manuel D'installation

Part number: 9835663080
EN

1. Unpack wall box

1.1
Place the wall box package on a flat and stable surface.
Remove sleeve.
1.2
Open the wall box package. Put the cardboard folder (A) aside.
Take out the wall box from its box.
Take out the wall dock.
Take out the bag with the screws, wall plugs and drill bits.
A
The keys (B) found in the cardboard folder are only needed for removing the wall box (C)
from its wall dock (D) (in case of maintenance).
Note: After installation, hand over the cardboard folder to the user, as it also contains the
charge card (E), the key fob (F) and wall box ID + security code (G).
C
10
INSTALLATION_WALL_BOX_SOCKET_PSA_B2C_MERGED.indd 10
D
A
G
E
F
B
11-9-2019 8:29:40