EdilKamin MYA Installation, Usage Et Maintenance page 34

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43
INSTRUCTIONS FOR USE
and "–" on the remote control at the same time, holding for a few seconds. As you release the keys, the display should show the
wording "LOAD". This should be carried out before ignition if the stove has stopped due to having run out of pellets, at the end of
operation to empty the combustion pot before turning.
It is quite normal for some pellets to remain, that the cochlea cannot suction.
With the stove on stand-by, press and hold the key
, on the remote control for 2 seconds. This will start-up the
Ignition is not at a preset time, however: its duration is automatically shortened if the board reports that certain tests have
Insert a piece of lit Diavolina into the combustion chamber, close the door and press
the remote control.
With the stove running, press and hold the key
rom the remote control for 2 seconds. The turn-off procedure will begin,
The turn-off phase involves:
OPERATIONS THAT CAN ONLY BE CARRIED OUT BY REMOTE CONTROL
clock. By then pressing the key "M", the following data appears in sequence and can be regulated:
day, month, year, hour, minutes, day of the week.
- 34
-

Publicité

Table des Matières
loading

Table des Matières