Principle Of Operation; Safety Information - EdilKamin MYA Installation, Usage Et Maintenance

PRINCIPLE OF OPERATION

The MYA stove produces hot air using wood pellets as fuel,
with electronically controlled combustion. Hereunder is the
The pellets are ignited by the air that is heated by an electrical
The smoke produced by combustion is extracted from the he-
at the bottom on the back of the stove, or on the top using an
The hearth is covered in cast iron, and closed frontally by a
glass ceramic door (to open use the dedicated "cold hand"
Fuel quantity, smoke extraction and combustion air supply
are all controlled by an electronic control board, which is
®
equipped with Leonardo software to achieve high combustion
All phases of operation can be managed via radio remote
control.
The stove is equipped with a serial port to connect an optional
D
F

SAFETY INFORMATION

The MYA stove is designed to heat, through automatic pellet
combustion in the hearth, the room where it is installed, both
by radiation and the air that comes out of the front grille.
children, with reduced physical, sensorial or mental abilities.
Children must be supervised to ensure they do not play with
the appliance.
to non-compliance with installation instructions, direct contact
or non-recommended fuel are introduced, or due to incorrect
maintenance.
for fuel.
devices that guarantee automatic shutdown. These are activated
without any intervention required.
accordance with the instructions given herein and the door
must not be opened during operation: combustion is fully
automatic and requires no intervention.
entered into the hearth or hopper.
COLD.
within; this is an essential requirement for the validation of the
guarantee.
A
become very hot (do not touch without wearing the thermal
B
stove.
E
the stove is installed, nor the air inlets of the stove itself.
C
with wet hands.
G
and safely.
COMBUSTION CHAMBER MUST NOT BE DEPOSI-
TED INSIDE THE HOPPER.TED INSIDE THE HOPPER.
- 23
-
-