Safety Information; Declaration Of Conformity - EdilKamin FLAT 100 Installation, Usage Et Maintenance

Dear Sir / Madam
Thank you for having chosen FLAT.
You are kindly asked to read through this information before using the fireplace in order for you to make use of all its features in
total safety.
In the event of any doubt, a request for spare parts or complaints, you should contact the Dealerwhom you bought it from,
quoting the details on the manufacturer's sticker and the type of appliance.
The number on the manufacturer's sticker is necessary for identification of the fireplace and this is found in the documentation
enclosed with it and also on the plate fixed on its front.
The documentation in question must be kept for identification.
• You must keep these instructions as you will need them for any information requests.
• The details are shown indicatively, both graphically and geometrically.

Safety information

The FLAT fireplace is designed to warm up the room/premises where it is placed by means of radiation and movement of warm air.
The only hazards that can derive from using the fireplace pertain to non-compliance with the installation instructions or if contact
is made with the fire or hot parts (glass, pipes, hot air outlet) or if foreign substances are put in the fireplace.
The only combustible material to be used is firewood.
No flammable products are to be used to clean the smoke flue.
The glass is to be cleaned when COLD and with suitable products (e.g. GlassKamin) and a cloth.
Do not clean when hot.
The exhaust pipes and the door reach hot temperatures when the fireplace is used.
Do not place anything which is not heat resistant near the fireplace.
NEVER use combustible liquids to light the fireplace or to rekindle the embers.
Do not obstruct the air ventilation openings in the room where the fireplace is installed, nor the air inlets of the fireplace.
Do not wet the fireplace.
Do not use reducers on the smoke exhaust pipes.
The fireplace must be installed in a place which is suitable against fire hazards and equipped with all that is required for the fire-
place to function properly and safely.
Important note
If the FLAT hearth malfunctions you are to contact the Dealer whom you bought it from or the Edilkamin dealer in your area.
Use only the manufacturer's original spare parts as this is the only way to be certain that the fireplace operates safely.
Improper use of the appliance will result in forfeiture of the warranty.
Proper use of the appliance means adhering to these operation instructions, the UNI 10683 standard, correct installation and
operation standards.
If installation is carried out in Italy, refer to the standard issued by the Italian Organisation for Standardisation: UNI 10683/2005
or subsequent amendments. In all other countries, please verify the laws and regulations in this regard.

DECLARATION OF CONFORMITY

The undersigned EDILKAMIN S.p.a. with head office headquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy - VAT IT00192220192
Declares under its own responsability as follows:
The wood fireplaces endowed specified below are in accordance with the 89/106/EEC (Construction Products)
WOOD FIREPLACES, trademark EDILKAMIN, called FLAT 100, 120
YEAR OF MANUFACTURE:
SERIAL NUMBER:
The compliance with the 89/106/EEC directive is besides determined by the compliance with the European standard:
UNI EN 13229:2006
EDILKAMIN S.p.a. will decline all responsability of malfunctioning or damage to the equipment in case of unauthorized substitution, assembly or
modifications of any sort on the said equipment on the part of non-EDILKAMIN personnel.
12
Ref. Data nameplate
Ref. Data nameplate