Kimex 164-6540 Manuel D'utilisation page 146

• Note that UART0 default value: ASCII, UART1 default value: HEX
In the tables given below, XY represents are variable byte.
All byte values are hexadecimal.
Error Responses
• NAK reply: 15
• Error reply: 1C 00 00 When the display cannot execute the received command for any reasons, it returns
When the display cannot understand the received command, it returns this value. In
such a case, check the sending code and send the same command again.
this value. In such a case, check the sending code and the setting status of the display.
English - 56 -