Kimex 164-6540 Manuel D'utilisation page 133

GETHPOS
VPOS
GETVPOS
DOTCLOCK
GETDOTCLOCK
PHASE
GETPHASE
AUTOPOS
SETOPSPOWER
GETOPSPOWER
SETOPSALWAYSON
Get horizontal position.
Set vertical position.
Get vertical position.
Set dot clock.
Get dot clock.
Set phase.
Get phase.
Set auto position
Set OPS power status
Get OPS power status
Set OPS Always on value
English - 43 -
no parameter
int n (-25 ≤ n ≤ 25)
no parameter
int n (-50 ≤ n ≤ 50)
no parameter
int n (-30 ≤ n ≤ 30)
no parameter
no parameter
string parameter "on" or "off"
no parameter
string parameter "true" or
"false"
#*The horizontal position is ...
or
#*GETHPOS is available only for
VGA Source.
#*set vertical position to ...
or
#*invalid value entered
or
#*VPOS is available only for VGA
Source.
#*The vertical position is ...
or
#*GETVPOS is available only for
VGA Source.
#*set dot clock to ...
(percentange in the range)
or
#*invalid value entered
or
#*DOTCLOCK is available only for
VGA Source.
#*The dot clock is ...
or
#*GETDOTCLOCK is available
only for VGA Source.
#*set dot clock to ...
(percentange in the range)
or
#*invalid value entered
or
#*PHASE is available only for VGA
Source.
#*The phase is ...
or
#*GETPHASE is available only for
VGA Source.
#*set auto position
or
#*Auto position is available only for
VGA Source.
#*Turning OPS on
#*Turning OPS off
#*The OPS is already on
#*The OPS is already off
#*The OPS is not enabled
#*The OPS is not plugged in
#*invalid value entered
#*The OPS is on
#*The OPS is off
#*The OPS is not enabled
#*The OPS is not plugged in
#*invalid value entered
#*OPS Always on set as true
#*OPS Always on set as false