Kimex 164-6540 Manuel D'utilisation page 109

If this option is set as Enabled, the Display will turn on with the active input source
(HDMI2, HDM3 or HDMI4 depending on which input source is active), when it is switched
on. This feature works based on HDMI 5V signal. When this signal is active the Display
wakes up and when the signal is inactive the Display shuts down. You can disable this
option by setting as Disabled. In order to use this feature in conjunction with the Auto
HDMI2, HDMI3,
Source Switch feature it is recommended to enable the Auto Source Switch option in
HDMI4 Wake Up
the Signage>Controls menu.
(optional)
If any Scheduler is set this option will be inactive and can not be set as Enabled.
Note: This feature or HDMI3 and HDMI4 options may not be available depending on
the model of your unit. If multiple devices are connected to the Display through HDMI
input sockets, this feature will not work.
English - 19 -