Kimex 164-6540 Manuel D'utilisation page 123

Command
Led
GETLED
SETSTANDBYLED
SETRC
GETRC
irkey
SETSOURCE
GETSOURCE
CHILDLOCK
OSDMENU
AUTOTVOFF
GETAUTOTVOFF
GETCOUNTRY
GETCURRENTANALOG-
TVSYSTEM
GETSWVERSION
BUILDINFO
GENERAL DISPLAY COMMANDS
Description
Turns the led on/off.
(Used for setting the led
statu of current state)
Get led on/off state.
(Used for getting the led
statu of current state)
Set Standby led status
Enables/disables remote
control commands.
Get remote control
commands enabled
status
irkey KeyValue(HEX).
Set source as enable/
disable.
Gets source.
Set child lock mode.
Set osd menu mode
Set auto panel off level.
Get auto panel off mode. no parameter
Get country in channels
state.
Get current analog tv
system value.
Returns the software
version of panel.
Reports the build info.
English - 33 -
Parameter
integer n (0 = off, 1 = on)
no parameter
string n (n = ON, n = OFF)
string-integer n (n = ON, n
= OFF)
no parameter
string-integer n (ex: irkey
0x38)
string n, integer b (n =
SCART1, n = SCART2, n =
FAV, n = SVHS, n = HDMI1,
n = HDMI2, n = HDMI3,
n = HDMI4, n = YPBPR, n
= VGA, n = SCART1S, n =
SCART2S, n = DP, n = OPS,
n = DVI, n = BACKAV, n =
WIDI ) (b = 1(enable), b =
0(disable))
no parameter
integer n (0 = off, 1 = on)
integer n (0 = off, 1 = on)
integer n (0 = off, 1 = on)
no parameter
no parameter
no parameter
no parameter
Return
Led is ON
or
Led is OFF
#*LED is on
or
#*LED is off
#*Standby Led is set to ON
or
#*Standby Led is set to OFF
or
#*Standby Led is not set (invalid
input)
set remote state to ON
or
set remote state to OFF
or
Missing remote state selection
or
wrong string parameter for remote
state
#*remote state is on
or
#*remote state is off
GenericIRKeySet key: n
#*Selected source n
#*Enable/Disable state : b
#*source is ...
#*set child lock state to n
#*set osd menu state to n
#*set auto tv off mode to ON
or
#*set auto tv off mode to OFF
#*auto TV off is on
or
#*auto TV off is off
#*COUNTRY IS : ...
#*CURRENT TV SYSTEM : ...
#*V...
#*Build info = ... Revision = ...