Kimex 164-6540 Manuel D'utilisation page 125

VIDOFF
VIDON
GETVIDSTATE
TIME
SETTIMEMODE
GETTIMEMODE
RTCSET
SETRTCDATE
GETRTCDATE
MENUTIMEOUT
GETMENUTIMEOUT
GETSTANDBY
STARTFTI
Select video off.
Select video on.
Get video state.
Display the current date
and time.
Set time mode
Get time mode
Set/Query RTC clock
Set/Query RTC date
Get RTC date
Set menu time out mode.
Get menu time out mode no parameter
Get standby on/off.
Start First Time
Installation by presenting
FTI dialog just as it does
when FTI is triggered
from menu by the user.
English - 35 -
no parameter
no parameter
no parameter
no parameter
string n ("auto", "manual")
no parameter
optional integer parameter
str-int (DD:MM:YYYY, 0 < DD
<= # of days in the month, 0
< MM < 13)
Example: SETRTCDATE
20:12:2016
no parameter
integer n (n = 0 , n = 15, n =
30, n = 60)
no parameter
no parameter
Video off.
Video on.
#*video is on
or
#*video is off
Time = ...
#*set time mode to n
or
#*invalid input type
or
#*can not set time mode
#*time mode is n
or
#*can not get time mode
Note: Above n is "auto" or
"manual".
First outputs the current RTC
elapsed seconds in decimal and
hex format:
#*RTC time is 200 0xc8
If a non-zero parameter is
passed, sets it as RTC elapsed
seconds(assumes parameter
is a UTC time) and outputs the
following:
#*RTC set time to 255
#*RTC new time is 255 0xff
#*RTC Date is set to ...
or
#*Wrong argument format use
SETRTCDATE DD:MM:YYYY
or
#*Invalid month
or
#*Invalid day
#*The RTC date is ...
#*set menu timeout mode to OFF
or
#*set menu timeout mode to 60
or
#*Invalid menu timeout mode
#*menu timeout mode is OFF
or
#*menu timeout mode is n
or
#*can not get menu timeout mode
Note: Above n is one of (15, 30,
60)
#*standby off
or
#*standby on
#*FTI was initialising.