Kimex 164-6540 Manuel D'utilisation page 131

NETCLONE
SETNETWORKTYPE
GETNETWORKTYPE
SETSUBNETMASK
GETSUBNETMASK
SETDEFAULTGATEWAY
GETDEFAULTGATEWAY
SETDNS-
CONFIGURATION
GETDNS
CONFIGURATION
SETDNS1
GETDNS1
SETDNS2
GETDNS2
Clone from FTP server
Before this process,
please check network
configuration (If a static
ip address is set, it will
also be cloned)
set network type (eg.
SETNETWORKTYPE
value) (value should
be 'wired', 'wireless' or
'disabled' as string)
get network type (eg.
GETNETWORKTYPE)
set subnet mask (subnet
mask value should be of
format nnn.nnn.nnn.nnn)
(eg. SETSUBNETMASK
nnn.nnn.nnn.nnn)
get subnet mask (eg.
GETSUBNETMASK)
set default gateway
(default gateway value
should be of format
nnn.nnn.nnn.nnn) (eg.
SETDEFAULTGATEWAY
nnn.nnn.nnn.nnn)
get default gateway (eg.
GETDEFAULTGATEWAY)
set DNS configuration
mode (auto,manual) (eg.
SETDNS
CONFIGURATION mode
(auto,manual))
get DNS configuration
mode (auto,manual) (eg.
GETDNS
CONFIGURATION)
set DNS server 1 (DNS
server value should be of
format nnn.nnn.nnn.nnn)
(eg. SETDNS1 nnn.nnn.
nnn.nnn)
get DNS server 1 (eg.
GETDNS1)
set DNS server 2 (DNS
server value should be of
format nnn.nnn.nnn.nnn)
(eg. SETDNS2 nnn.nnn.
nnn.nnn)
get DNS server 2 (eg.
GETDNS2)
English - 41 -
string "<ip-of-ftp-server/
path>"
Ex:
ftp://user_name:password@
ip_addr/source_path
string n ('wired', 'wireless' or
'disabled')
no parameter
string "nnn.nnn.nnn.nnn"
no parameter
string "nnn.nnn.nnn.nnn"
no parameter
string n ('auto' or 'manual')
no parameter
string "nnn.nnn.nnn.nnn"
no parameter
string "nnn.nnn.nnn.nnn"
no parameter
#* Invalid parameter
or
#* "file_name" is cloned
successfully
or
#* "file_name" clone is failed
#*Network type is set to: <network-
type>
or
#*wireless connnection is not
supported!
or
#*Network is not supported!
or
#*invalid parameter <network-
type>
#*the network type is <network-
type>
#*set subnet mask: nnn.nnn.nnn.
nnn
or
#*setting subnet mask is failed
#*the subnet mask is nnn.nnn.
nnn.nnn
#*set default gateway: nnn.nnn.
nnn.nnn
or
#*setting default gateway is failed
#*the default gateway is nnn.nnn.
nnn.nnn
#*set DNS configuration to: <dns-
conf-mode>
or
#*setting DNS configuration is
failed
#*the DNS configuration is manual
or
#*the DNS configuration is auto
or on error:
#*the DNS configuration is
unknown
#*set DNS server 1 to: nnn.nnn.
nnn.nnn
or
#*setting DNS server 1 failed
#*DNS server 1 is nnn.nnn.nnn.
nnn
#*set DNS server 2 to: nnn.nnn.
nnn.nnn
or
#*setting DNS server 2 failed
#*DNS server 2 is nnn.nnn.nnn.
nnn