Product Information; Type Key; Technical Data - Wilo Medana CV1-L Notice De Montage Et De Mise En Service

3

Product information

3.1

Type key

Example:
Wilo
Medana
C
V
1
L
6
02
1
E
A
10
F
3.2

Technical data

Maximum utilisation pressure
Maximum operating pressure (see pump type key on rating plate and paragraph 3.1)
Maximum suction pressure
Notice: the suction pressure (P input) + the pressure at zero delivery rate (P zero delivery
rate) must always be lower than the maximum permitted operating pressure (P max). P input
+ P zero delivery rate ≤ P max. Refer to the pump rating plate for the maximum operating
pressure: P max.
Temperature range
Fluid temperature
Ambient temperature
Electrical data
Motor protection rating
Insulation class
Frequency
Voltage
Motor efficiency
Other characteristics
Humidity
Altitude
Installation and operating instructions Wilo-Medana CV1-L
Product information
Medana CV1-L.602-1/E/A/10F
Brand
Product family – Surface pump
Commercial series
Vertical pump
Series level (1 = entry level, 3 = standard level, 5 = premium level)
L = Long shaft
E = Electronic control
3
Volume flow in m /h
Number of impellers
1 = Pump housing in 1.4308 stainless steel + hydraulics in 1.4307 stainless steel
E = EPDM seal
V = FKM seal
A = 230 V - Frequency 50Hz - Single-phase
B = 220 V - Frequency 60Hz - Single-phase
C = 230 V - Frequency 60Hz - Single-phase
D = 400 V - Frequency 50Hz - Three-phase
E = 230/400 V - Frequency 50Hz - Three-phase
F = 220/380 V - Frequency 60Hz - Three-phase
G = 265/460 V - Frequency 60Hz - Three-phase
I = 460 V - Frequency 60 Hz - Three-phase
Maximum pressure of the pump (mechanical seal) in bar
O = oval flanges
F = round flanges
P = Victaulic connections
10 bar 16 bar
6 bar 10 bar
-20 °C to +120 °C with EPDM seals
-20 °C to +90 °C with VITON seals
-15 °C to +50 °C
See rating plate
See rating plate
See rating plate
See rating plate
See rating plate
< 90 % without condensation
≤ 1000 m (> 1000 m on request)
en
23