Application; Description And Function; Description Of The Product - Wilo Medana CV1-L Notice De Montage Et De Mise En Service

5

Application

6

Description and function

6.1

Description of the product

Installation and operating instructions Wilo-Medana CV1-L
Application
CAUTION
Risk of material damage
If the delivered material is to be installed at a later date, store it in a dry place and
protect it from impacts and any external influences (humidity, frost etc.). Temperat-
ure range for transport and storage: -30 °C to +60 °C.
Handle the product with care so as not to damage it prior to installation.
This product has been designed to pump hot or cold water, water/glycol mixtures or
other low-viscosity fluids that are free of mineral oil, solid or abrasive substances, or
materials containing long fibres.
CAUTION
Risk of motor heating
A technical opinion is required prior to pumping fluid that is denser than water.
DANGER
Risk of explosion
Do not use this pump to convey flammable or explosive liquids.
Fields of application:
Version with stainless steel housing:
MEDANA CV1-L
Water supply and pressure boosting
Industrial systems
Cooling water circulation systems
Irrigation systems
See Fig. 7
1. Flange
2. Sleeve
3. Filler screw
4. Drainage screw
5. Stage casing
6. Impeller
7. Hydraulic shaft
8. Pump housing
9. Mechanical seal
10. Terminal box
11. Lantern
12. Condensate plugs
13. Base plate
14. Stud bolt
See Fig. 1
1. Valve on the suction side
2. Valve on the end discharge side
3. Non-return valve
en
25