Seat Time (Optional For Seat Sensor) - Sentiotec Infrabox Instructions De Montage Et Mode D'emploi

Installation instructions, for professionals only

6.5. Seat time (optional for seat sensor)

DIP-Bank 2
Function selection switch 1 and 2
By selecting the seat time, the time for the
optional seat sensor available can be set.
After the set operating time has elapsed,
the infrared heater/infrared plate switches
off automatically.
The operating time can be adjusted us-
ing the function selection switch. For the
required position of the function selection
switch, see the following table.
Function
selection
switch
5 min OFF
10 min ON
15 min OFF
20 min ON
Note: Seat operating mode (see 6.1. Operating mode on page 20) must be
activated to be able to use the function.
Example: Seat-time 5 min
EIN
AUS
1 2
OFF
OFF
ON
ON
Gesamtlaufzeit (siehe 6.3 Laufzeit)
Auto
Sitzplatzlaufzeit
5 min
Fig. 13: Seat-time
p. 25/44
ON
OFF
EN