Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service - Bosch BO Série Notice D'utilisation

Appliance self-test

Your appliance features an automatic self-test program
which indicates sources of faults that may be repaired by
customer service only.

Starting the appliance self-test

1. Switch off the appliance and wait 5 minutes.
2. Switch on the appliance and then press and hold
down the super button 2 for 3–5 seconds within the
first 10 seconds until an audible signal sounds.
The self-test program starts.
While the self-test is running, a long audible signal
sounds in the meantime.
If 2 audible signals sound and the set temperature is
displayed after the self-test has ended, your appliance is
OK.
If 5 audible signals sound and the freezer compartment
super button flashes for 10 seconds after the self-test
has ended, there is a fault. Inform customer service.

Ending the appliance self-test

When the program has ended, the appliance switches
over to normal operation.

Customer service

If required, we recommend that you have the door
hinges changed over by our customer service. You can
find out the costs for changing over the door hinges from
your customer service.
Before you call customer service, see the chapter
Rectifying minor faults yourself.
After checking according to the chapter Rectifying minor
faults yourself, additional help can be requested by
calling the Bosch Customer Support Center,
1-800-944-2904 (toll-free), from anywhere in the United
States.
In Canada contact your Bosch customer service or call
1-800-944-2904.
Write down the following information about your
appliance so that you have it ready and can get better
assistance if you require support from customer service.
Dealer's name:
Address:
Telephone number:
Purchase date:
Model number:
FD number:
Serial number
Type
en-us
E - Nr
FD - Nr
19